DEPARTMENT OF MECHANICAL ENGINEERING
Department at a Glance
Intake
120
Faculty : student
Laboratories
2 research labs
Addon Course
Student Awards
Message from the Head of the Department
Those who wants to develop/acquire breadth and depth of knowledge and skills required to design fabricate and maintenance of things ranging from a safety pin to a space craft. Those who are interested to work with massive machines to tiny precision instruments/devices.
Laboratories
Courses Offered
Course Offered | Specialization | Intake |
|---|---|---|
B.Tech | Mechanical Engineering | 120 |
Professional Memberships
With the outstanding performance in academics, the cherry on the cake for the department is its student clubs and the professional body memberships.
Society of Automative Engineers (SAE) : SAE is a non-profit body that promotes & undertakes initiatives for knowledge dissemination & advancement in mobility technologies catering to land, sea, air & space. The society based at USA, spreads its wings over 150,000 memberships in around 100 nations.
BAJA : The BAJA SAE Series an event for the undergraduate engineering students organized globally by the SAE. It tasks the students to design, build, test and validate a single seater four wheeled All-Terrain Vehicle (ATV) in which around 500 student teams from various parts if the country. The team invincible 2.0 from the department is composed of 25 hard working and dedicated students from the final and pre- final years. The sedulous team work has been appreciated by the Chief Minister of the State, Sri.N.ChandraBabu Naidu during his visit to the college.
SUPRA: Under the SAE, is another event named SUPRA, which throws forward a competition of the design and fabrication of a racing car. Team Svayukti emerged out with glorious success, taking onwards the legacy of the college standing in the 27th among 250 teams across the country.
ELECTRIC SOLAR VEHICLE CHALLENGE (ESVC): TEAM Vikranta, the all energetic 25 membered team made their mark by securing the 5th position in the E-BAJA’15 from a competition of 300 odd teams. The team has also participated in the Asia’s Largest Solar Vehicle Racing Event and was bestowed upon with the “Best Appreciation Award”.
GO-KART:Enthusiasm is all that a Go-Kart puts in. “National Go-kart Design Challenge – 2016” is an event that deals with the designing and building of a Go-Karting Vehicle. “Team Aadhya”, a 16 membered all-girls team from the department have showed all their prowess by standing 40th in the National level. Also, the team has proved its worth in the prestigious “ Vishnu Kart Championship’16, projecting the spirit of team work.
(ISHRAE): “Indian society of Heating, Refrigeration and Air conditioning (ISHRAE) was started from 2016”.
- Vision & Misson
- Faculty Development FDPs, Trainings, STTPs, etc
- Industry Connect Lectures, Visits & Alumni Talks
- Research Patents & Publications
- Research Guidance
- Achievements
- Placements
- Contact
Vision
To produce globally competent Mechanical Engineers with strong fundamentals, sound problem solving skills with practical exposure and professional ethics to serve the industry and societal needs.
Mission
The Department of Mechanical Engineering of M V G R College of Engineering in tune with its vision would offer under-graduate program in engineering to prepare students for a successful career as Professional Mechanical Engineer in a very dynamically changing industry by:
|
M1. |
Impart high quality education to the students with emphasis on fundamental concepts and practical application and are whetted to meet the challenges of the industry to mature enough into highly capable leaders in their chosen area of interest. |
|
M2 |
Inculcating strong mathematical & computing fundamentals among students that form the baseline for modern day solutions with emphasis on design development. |
|
M3 |
Inculcating among its students the need for continuous learning and the skills necessary to continue their education, develop professionally and push the boundaries of knowledge long after their graduation. |
|
M4 |
Imbibing in its students a deep understanding of expected professional, ethical and societal responsibilities. |
|
M5 |
Inculcating among its students a rich and reasonably comprehensive skill set with practical exposure in putting the same to use for problem solving in a team setting enabling them to be valuable contributors to the Mechanical industry & society at large immediately after graduation. |
|
M6 |
Providing a stimulating environment for faculty & students alike that fosters a culture of knowledge seeking and sharing & appreciation of intellect helping all involved to grow both as individuals and as Professional Mechanical Engineers. |
Faculty Development Programs/ Training Activities / STTPs:
|
S.No |
Name of the Faculty |
Details of the participation (2024-25) (Faculty Development/Training activities/STTPs) |
|
|
|
|
|
1 |
Dr. N Ravi Kumar |
A One Week ATAL online FDP on Innovative Green Energy Generation and Storage Technologies organized by MVGR College of Engineering, Vizianagaram from 02-12-2024 to 07-12-2024 |
|
2 |
Dr. K Praveen |
A One Week ATAL online FDP on Innovative Green Energy Generation and Storage Technologies organized by MVGR College of Engineering, Vizianagaram from 02-12-2024 to 07-12-2024 |
|
3 |
Dr. M Kannam Naidu |
A One Week ATAL online FDP on Innovative Green Energy Generation and Storage Technologies organized by MVGR College of Engineering, Vizianagaram from 02-12-2024 to 07-12-2024 |
|
4 |
Dr. M K Naidu |
One Day Workshop on Introduction to Robotic Process Automation organized by Infosys on 28-06-2024 |
|
5 |
Dr. M K Naidu |
Completed an EdX course on The Path to Happiness: What Chinese Philosophy Teaches Us About the Good Life on 21-06-2024 |
|
6 |
Dr. M K Naidu |
One Day Workshop on Introduction to Deep Learning organized by Infosys on 26-06-2024 |
|
7 |
Dr. M K Naidu |
One Day Workshop on Introduction to Natural Language Processing organized by Infosys on 21-06-2024 |
|
8 |
Dr. S Srinivasa Rao |
A One Week ATAL online FDP on Innovative Green Energy Generation and Storage Technologies organized by MVGR College of Engineering, Vizianagaram from 02-12-2024 to 07-12-2024 |
|
9 |
Dr. M Anil Prakash |
A One Week ATAL online FDP on Innovative Green Energy Generation and Storage Technologies organized by MVGR College of Engineering, Vizianagaram from 02-12-2024 to 07-12-2024 |
|
10 |
Dr. B A Ranganath |
A One Week ATAL online FDP on Innovative Green Energy Generation and Storage Technologies organized by MVGR College of Engineering, Vizianagaram from 02-12-2024 to 07-12-2024 |
|
11 |
Dr. B A Ranganath |
Transformative Technologies in Manufacturing: Faculty Development Program on Industry-4.0,Advanced Materials, And Intelligent Systems |
|
12 |
Dr. Boddepalli Anant Ranganath |
On Sustainable Technologies for Advancing Sustainable Development Goals (SDGs) 2024 |
|
13 |
Dr. M. Siva Subrahmanyam |
Intelligent Cyber Physical Systems: Blockchain Recent Trends & Applications 2024 |
|
14 |
Dr. S Subrahmanyam Mendu |
Two-day Workshop on Adsorption for CO2 Capture, Green Refrigeration & Energy Storage organized by IIT Dhanbad from 13-04-2024 to 14-04-2024 |
|
15 |
Dr. S Subrahmanyam Mendu |
Power BI for Beginners 2024 |
|
16 |
Dr. B Madhava Varma |
A One Week ATAL online FDP on Innovative Green Energy Generation and Storage Technologies organized by MVGR College of Engineering, Vizianagaram from 02-12-2024 to 07-12-2024 |
|
17 |
Dr. K Ajay |
A One Week ATAL online FDP on Innovative Green Energy Generation and Storage Technologies organized by MVGR College of Engineering, Vizianagaram from 02-12-2024 to 07-12-2024 |
|
18 |
Dr. Sanyasi Naidu Sureddi |
A One Week ATAL online FDP on Innovative Green Energy Generation and Storage Technologies organized by MVGR College of Engineering, Vizianagaram from 02-12-2024 to 07-12-2024 |
|
19 |
Dr. Sanyasi Naidu Sureddi |
Product Design 2024 |
|
20 |
Dr. Sanyasi Naidu Sureddi |
Six Sigma White Belt Certification 2024 |
|
21 |
Dr. Sanyasi Naidu Sureddi |
Energy Literacy Training 2024 |
|
22 |
Dr. S Sanyasi Naidu |
One Day Faculty Workshop - 2k24 On “GRANT WRITING” Writing, Defence & Implementation |
|
23 |
Dr. G Veeraiah |
A One Week ATAL online FDP on Innovative Green Energy Generation and Storage Technologies organized by MVGR College of Engineering, Vizianagaram from 02-12-2024 to 07-12-2024 |
|
24 |
Mr. Ch. Varun |
A One Week ATAL online FDP on Innovative Green Energy Generation and Storage Technologies organized by MVGR College of Engineering, Vizianagaram from 02-12-2024 to 07-12-2024 |
|
25 |
Mr. Varun Chebrolu |
Industry 4.0: Research & Applications Perspective 2024 |
|
26 |
Mr. Rajesh Guntur |
A One Week ATAL online FDP on Innovative Green Energy Generation and Storage Technologies organized by MVGR College of Engineering, Vizianagaram from 02-12-2024 to 07-12-2024 |
|
27 |
Mr. M Y Prasada Rao |
Two days workshop done on materials characterization techniques by electron microscopy 2024 |
|
28 |
Mr. M Y Prasada Rao |
A One Week ATAL online FDP on Innovative Green Energy Generation and Storage Technologies organized by MVGR College of Engineering, Vizianagaram from 02-12-2024 to 07-12-2024 |
|
29 |
Mr. M Y Prasada Rao |
Design Thinking Fundamentals 2024 |
|
30 |
Mr. M Y Prasada Rao |
One Day Workshop on Electric Cars: Introduction organized by Delft University of Technology on 01-06-2024 |
|
31 |
K Pavan Kumar |
Completed 6 Week EdX Program on Exercising Leadership: Fundamental Principles on 29-07-2024 |
|
32 |
K Pavan Kumar |
Five-day Program on Advancements in Automobile Engineering for Sustainable Development organized by VNR Vignan Jyothi Institute of Engineering and Technology, Hyderabad from 24-06-2024 to 28-06-2024 |
|
33 |
Mr. K Pavan Kumar |
Advances In Materials Processing Technology Organized by The Department of Metallurgical Engineering, O.P.Jindal University,Raigarh,From 20th To 24th January 2025. |
|
34 |
Mr. Pothala Sreenu |
Two-week FDP on Bioprinting of Tissue and Organs - An Evolution of Technology and Materials organized by GMRIT, Rajam from 18-11-2024 to 30-11-2024 |
|
35 |
Mr. P Sreenu |
A One Week ATAL online FDP on Innovative Green Energy Generation and Storage Technologies organized by MVGR College of Engineering, Vizianagaram from 02-12-2024 to 07-12-2024 |
|
36 |
Dr. G Pramod Kumar |
Five-day Program on Intelligent Cyber Physical Systems: Blockchain Recent Trends and Applications, organized by MVGR College of Engineering from 08-07-2024 to 13-07-2024 |
|
37 |
Dr. G Pramod Kumar |
Advances in Metal Forming Technology: Innovation, Future Scope and Challenges 2024 |
|
38 |
Dr. G Pramod Kumar |
A One Week ATAL online FDP on Innovative Green Energy Generation and Storage Technologies organized by MVGR College of Engineering, Vizianagaram from 02-12-2024 to 07-12-2024 |
|
39 |
Mr. D Santosh Kumar |
A One Week ATAL online FDP on Innovative Green Energy Generation and Storage Technologies organized by MVGR College of Engineering, Vizianagaram from 02-12-2024 to 07-12-2024 |
|
40 |
Mr. D Santosh Kumar |
Advances in Metal Forming Technology: Innovation, Future Scope and Challenges 2024 |
|
41 |
Dr. B Murali Krishna |
A One Week ATAL online FDP on Innovative Green Energy Generation and Storage Technologies organized by MVGR College of Engineering, Vizianagaram from 02-12-2024 to 07-12-2024 |
|
|
|
|
|
S. No. |
Name of the faculty |
Details of the participation 2023-24 (Faculty Development/Training activities/STTPs) |
|
1 |
Dr. S Adinarayana |
Two-day National Conference on Condition Monitoring organized by NSTL, Vizag from 27-04-2023 to 28-04-2023 |
|
2 |
Dr. M K Naidu |
One day Program on Champions Leadership Training organized by SAEINDIA Southern Section on 22-04-2023 |
|
3 |
Dr. M K Naidu |
Two-day National Conference on Condition Monitoring organized by NSTL, Vizag from 27-04-2023 to 28-04-2023 |
|
4 |
Dr. S Subrahmanyam Mendu |
A Fifteen-Day Short-Term Online Course on Emerging Research Trends in Computer Science and Engineering organized by JNTUGV, Vizianagaram from 26-06-2023 to 10-07-2023 |
|
5 |
Dr. S Subrahmanyam Mendu |
One Week Live Online Industrial Training on Deep Learning organized by IIT, Roorkee from 25-12-2023 to 29-12-2023 |
|
6 |
Dr. S Subrahmanyam Mendu |
Gaming Competition LinkedIn Workshop 2023 |
|
7 |
Dr. Sanyasi Naidu Sureddi |
Numerical and Simulation Tools for Research in Mechanical Engineering from 20-06-2023 to 24-06-2023 |
|
8 |
Dr. Sanyasi Naidu Sureddi |
Integrating Autodesk Fusion – 360 in Engineering Subjects from 26-06-2023 to 01-07-2023 |
|
9 |
Dr. Sanyasi Naidu Sureddi |
Business Intelligence using Power BI from 15-07-2023 to 16-07-2023 |
|
10 |
M Y Prasada Rao |
One Week FDP on Integrating Autodesk Fusion -360 in Engineering Subjects organized by Lendi Institute of Technology, Vizianagaram from 26-06-2023 to 01-07-2023 |
|
11 |
M Y Prasada Rao |
One Week FDP on Advancement in Mechanical Engineering organized by LBRCE, Mylavaram from 19-06-2023 to 24-06-2023 |
|
12 |
K Pavan Kumar |
One Week FDP on Integrating Autodesk Fusion -360 in Engineering Subjects organized by Lendi Institute of Technology, Vizianagaram from 26-06-2023 to 01-07-2023 |
|
13 |
K Pavan Kumar |
One Week Online FDP on Role of 3D Printing in Digital Manufacturing organized by Anurag University from 03-07-2023 to 07-07-2023 |
|
T. No. |
Name of the faculty |
Details of the participation 2022-23 (Faculty Development/Training activities/STTPs) |
|
1 |
G Veeraiah |
Nano Structured Materials- Synthesis, Characterization, and Applications from 10-10-2022 to 17-10-2022 at JNTUK University College of Engineering, Vizianagaram |
|
2 |
M Yerni Prasada Rao |
Trends and Challenges in the Development of Electric Vehicles and Hybrid Electric Vehicles (Series 1) from 26-09-2022 to 30-09-2022 |
|
3 |
Mr. Devalingam Santhosh Kumar |
Trends and Challenges in the Development of Electric Vehicles and Hybrid Electric Vehicles (Series 1) from 26-09-2022 to 30-09-2022 |
Bridging Academia and Industry: Guest Lectures, Industry Visits & Alumni Interactions
Some recent activities from 2024 till now:
Guest Lectures:
- Guest Lecture on “Industry 4.0 - Revolutionizing the Future of Work in Different Sectors” delivered by Mr C V Gowri Shankar – Ashok Leyland - Chennai building on 21.02.25 for III B. Tech Mechanical and Electrical students.
- Guest Lecture on “Enhancing the industry-readiness” delivered by Dr. Ritu Maity, Senior Engineer and Head AI Division - CTTC -Bhubaneswar on 12.02.25 for III B. Tech Mechanical students.
- Guest Lecture on “Empowering engineers – A Comprehensive frame work for industry readiness” delivered by Mr Siva Karunakarm – CEO and Mr Satya – Technical Expert,AEP Certification on 12.12.24 for III B. Tech Mechanical students.
- Guest Lecture on “Material and manufacturing process selection for automotive applications” delivered by Dr G Venkata Sarath Kumar, Lead Materials advanced Engineering, Ashok Layland on 06.03.24 for III B. Tech Mechanical students.
- Guest Lecture on “Steel and Economics” delivered by Dr Suryanarayana M. Reddy, Zonal head, PAG South, Tata Steel on 06.03.24 for III B. Tech Mechanical students.
ALUMNI interactions:
- Interactive session on “Rising above the swarm” by M C Sekhar Khasibatla - Director, Product strategy and management, Oracle payments - Fintech Division of Oracle on 30.12.24 for II and III B Tech Mechanical Students
- Interactive session on “Career planning and cracking placement” by Mr. Koushik , Design Engineer, R,&D, Volvo, Bangalore on 13.08.24 for IV B Tech Mechanical Students.
- Interactive session on “Opportunities for mechanical students” by P Sai Vardhan-Sr Software Er-ZEMOSO Tech pvt limited, K Hanumanth kumar - Sr Tech - RINL, Jaya Venkat K-Mech Er -Automann heavy duty -Canada on 26.12.24 for III B Tech Mechanical Students.
Industrial Visits / Tours arranged:
- Industrial visit arranged for III B Tech students at Diesel/Electrial Loco shed – Visakhapatnam on 14-02-2025
- Industrial visit arranged for III B Tech Section A students at BHEL – Visakhapatnam on 16-09-2024
- Industrial visit arranged for III B Tech Section B students at BHEL – Visakhapatnam on 14 -09-2024
- Industrial visit arranged for II B Tech Section B students at SARDA steels – Kothavalasa on 01-03-2024
- Industrial visit arranged for II B Tech Section A students at SARDA steels – Kothavalasa on 06-03-2024
- Industrial visit arranged for III B Tech Section B students at SAMKRG Pistons and Rings Manufacturing pvt. Limited - Srikakulam on 06-01-2024
- Industrial visit arranged for III B Tech Section A students at SAMKRG Pistons and Rings Manufacturing pvt. Limited - Srikakulam on 02-01-2024
Publications:
2025
|
S.No |
Authors |
Title of the paper |
Name of the Journal |
Vol. No |
Issue No. |
Page No. |
Month& Year |
Impact factor |
SCI/SCIE/Scopus |
Publisher |
|
1. |
Pilli Neeraja, Ajit Kumar Senapati, SwarnalathaMoora, N DhanunjayaraoBorra, Ravi Kumar Kottala |
Experimental analysis and optimization of friction welding parameters for joining dissimilar materials through design of experiments |
International Journal on Interactive Design and Manufacturing (IJIDeM) |
19 |
1 |
405-422 |
2025 |
2.1 |
ESCI |
Springer |
|
2. |
RS Umamaheswara Raju, K Ravi Kumar, K Vargish, M Bharath Kumar |
Machine learning based surface roughness assessment via CNC spindle bearing vibration |
International Journal on Interactive Design and Manufacturing (IJIDeM) |
19 |
1 |
477-494 |
2025 |
2.1 |
ESCI |
Springer |
|
3. |
RS Umamaheswara Raju, K Ravi Kumar, K Vargish, M Bharath Kumar |
Machine learning based surface roughness assessment via CNC spindle bearing vibration |
International Journal on Interactive Design and Manufacturing (IJIDeM) |
19 |
1 |
477-494 |
2025 |
2.1 |
ESCI |
Springer |
|
4. |
KR Kumar, RK Raghutu, D Venkata Padma, SVAR Sastry, R Hemalatha |
Data-driven approaches to sustainable phase change material selection in latent heat storage systems |
International Journal of Energy and Water Resources |
0 |
0 |
1-14 |
2025 |
2.1 |
Scopus |
Springer |
|
5 |
Muralikrishna Boni, Venkateswarlu Velisala,Mamidi Adarsh Kumar,Kanumareddy Balu, Amarnath Gundalabhagavan |
Experimental evaluation of divergent parallel flow field effect on the proton exchange membrane fuel cell performance |
International journal of Ionic |
|
|
|
2025 |
2.4 |
SCIE |
Springer |
|
6 |
K. Siva Prasad , Sunnam Nagarajub , S. Chiranjeeva Rao and Muralikrishna Boni |
Experimental investigation on dynamic wireless charging system for electric vehicles using different shape coils |
Energy sources |
|
|
|
2025 |
2.3 |
SCIE |
Taylor & Francis |
2024
|
1 |
K. Raghu Ram Mohan Reddy,SilaparasettiSrinivasaRao,Manoj Kumar Elipey,B. Kiran Babu&Ratna Sunil Buradagunta |
Shot peening of AZ31 magnesium alloy: role of surface microstructure and iron diffusion on corrosion behaviour |
The Canadian Journal of Metallurgy and Materials Science |
64 |
1 |
226-236 |
2024 |
2 |
|
|
|
2 |
D Nagaraju, AR Mohammad, S S Mendu, G Uma Maheswarao |
CFD studies of Sigma-Thermic Heat transfer oil and nanofluids in a natural circulation loop for different inlet temperatures of hot heat exchanger |
Engineering Research Express |
6 |
2 |
25540 |
2024 |
1 |
ESCI/Scopus |
IOP |
|
3 |
D Nagaraju, S S Mendu, N D Chinta |
Influence of building orientation and thermal mass configuration on the prediction of Natural Ventilation Potential (NVP) of various climates of India |
Environmental Science and Pollution Research |
|
|
- |
2024 |
5.88 |
ESCI/Scopus |
Springer |
|
3 |
G Pramod kumar |
Prediction of tensile behaviour of hybrid laser arc welded Inconel 617 alloy using machine learning models |
International Journal on Interactive Design and Manufacturing (IJIDeM) |
|
|
|
2024 |
2.1 |
SCIE |
Springer |
|
5. |
MuralikrishnaBoni,VenkateswarluVelisala |
Experimental analysis of the performance of a passive direct alcoholic fuel cell with different alcoholic fuels and blends of methanol-alcoholic additives |
Sadhana |
|
|
|
2024 |
1.4 |
SCIE |
Springer |
|
6. |
Muralikrishna Boni ,Ch Sai Manikanta , VenkateswarluVelisala |
Experimental evaluation of proton exchange membrane fuel cell performance with sinusoidal flow channel designs |
International Journal of Hydrogen Energy |
|
|
|
2024 |
|
SCIE |
Elseveir |
|
7. |
Dhanunjay Kumar Ammisetti, Bharat Kumar Chigilipalli, Baburao Gaddala, Ravi Kumar Kottala, Radhamanohar Aepuru, T Srinivasa Rao, Seepana Praveenkumar, Ravinder Kumar |
Experimental Investigation and Machine Learning Modeling of Tribological Characteristics of AZ31/B4C/GNPs Hybrid Composites |
Crystals |
14 |
12 |
1007 |
2024/11/21 |
2.4 |
SCIE |
MDPI |
|
8. |
VaddiDhilleswara Rao, Ramakrishna Raghutu, Korada Santa Rao, Ravi Kumar, DV Padma, SVAR Sastry |
Efficient biosorption of cadmium ions from wastewater using iron oxide–maize shell activated bio-carbon nanocomposites |
Biomass Conversion and Biorefinery |
0 |
0 |
1-12 |
2024/9/28 |
3.5 |
SCIE |
Springer |
|
9. |
RapetaSundaraRamam, Satish Pujari, Bharat Kumar Chigilipalli, BukkeDevarajNaik, Ravi Kumar Kottala, Venkata CharanKantumuchu |
Fabrication and optimization of acoustic properties of natural fiber reinforced composites |
International Journal on Interactive Design and Manufacturing (IJIDeM) |
18 |
6 |
3681-3689 |
2024/8 |
2.1 |
ESCI |
Springer |
|
10. |
RS Umamaheswara Raju, Ravi Kumar Kottala, B Madhava Varma, Praveen Barmavatu, Radhamanohar Aepuru |
Precision enhancement in CNC face milling through vibration-aided AI prediction of surface roughness |
International Journal on Interactive Design and Manufacturing (IJIDeM) |
0 |
0 |
1-15 |
2024/7/2 |
2.1 |
ESCI |
Springer |
|
11. |
RS Umamaheswara Raju, Ravi Kumar Kottala, B Madhava Varma, Praveen Barmavatu, Radhamanohar Aepuru |
Precision enhancement in CNC face milling through vibration-aided AI prediction of surface roughness |
International Journal on Interactive Design and Manufacturing (IJIDeM) |
0 |
0 |
1-15 |
2024/7/2 |
2.1 |
ESCI |
Springer |
|
12. |
RS Umamaheswara Raju, Ravi Kumar Kottala, B Madhava Varma, Praveen Barmavatu, Radhamanohar Aepuru |
Precision enhancement in CNC face milling through vibration-aided AI prediction of surface roughness |
International Journal on Interactive Design and Manufacturing (IJIDeM) |
0 |
0 |
1-15 |
2024/7/2 |
2.1 |
ESCI |
Springer |
|
13. |
G Pramod Kumar, KR Balasubramanian, Ravi Kumar Kottala, Bharat Kumar Chigilipalli, KV PhaniPrabhakar |
Prediction of tensile behaviour of hybrid laser arc welded Inconel 617 alloy using machine learning models |
International Journal on Interactive Design and Manufacturing (IJIDeM) |
0 |
0 |
1-13 |
2024/5/26 |
2.1 |
ESCI |
Springer |
|
14. |
G Pramod Kumar, KR Balasubramanian, Ravi Kumar Kottala, Bharat Kumar Chigilipalli, KV PhaniPrabhakar |
Prediction of tensile behaviour of hybrid laser arc welded Inconel 617 alloy using machine learning models |
International Journal on Interactive Design and Manufacturing (IJIDeM) |
0 |
0 |
1-13 |
2024/5/26 |
2.1 |
ESCI |
Springer |
|
15. |
C Ramanjaneyulu, Santhosh Reddy, T Vinoth, Ravi Kumar, A Saikiran |
Synthesis and characteristic analysis of an inorganic composite phase change materials for medium-temperature thermal storage |
Powder Technology |
434 |
0 |
119381 |
2024/2/1 |
4.5 |
SCI |
Elsevier |
|
16. |
G Pramod Kumar, KR Balasubramanian, MuralimohanCheepu, Ravi Kumar Kottala |
Characterization of corrosion behavior of inconel 617 welded joints using cmt-gmaw multi-control welding |
Surface Review and Letters |
31 |
03 |
2450023 |
2024/3/27 |
1.2 |
SCIE |
World Scientific |
|
17. |
G Pramod Kumar, KR Balasubramanian, MuralimohanCheepu, Ravi Kumar Kottala |
Characterization of corrosion behavior of inconel 617 welded joints using cmt-gmaw multi-control welding |
Surface Review and Letters |
31 |
03 |
2450023 |
2024/3/27 |
1.2 |
SCIE |
World Scientific |
|
18. |
D Venkata Padma, Kottala Ravi Kumar, SVAR Sastry, Praveen Barmavatu |
Studies on thermal degradation kinetics and machine learning modeling of hydrochar produced from hydrothermal carbonization of municipal sewage sludge and key lime peel |
Biomass Conversion and Biorefinery |
0 |
0 |
1-16 |
2024/5/15 |
3.5 |
SCIE |
Springer |
|
19. |
Soham Das, Ranjan Kumar Ghadai, Gaurav Sapkota, SpandanGuha, Praveen Barmavatu, Kottala Ravi Kumar |
Optimization of CNC turning parameters of copper–nickel (Cu–Ni) alloy using VIKOR, MOORA and GRA techniques |
International Journal on Interactive Design and Manufacturing (IJIDeM) |
0 |
0 |
1-10 |
2024/1/5 |
2.1 |
ESCI |
Springer |
|
20. |
RS Umamaheswara Raju, Ravi Kumar Kottala, B Madhava Varma, Palla Krishna, Praveen Barmavatu |
Internet of Things and hybrid models-based interpretation systems for surface roughness estimation |
AI EDAM |
38 |
0 |
E11 |
2024/1 |
2 |
SCIE |
Cambridge University Press |
|
21. |
RS Umamaheswara Raju, Ravi Kumar Kottala, B Madhava Varma, Palla Krishna, Praveen Barmavatu |
Internet of Things and hybrid models-based interpretation systems for surface roughness estimation |
AI EDAM |
38 |
0 |
E11 |
2024/1 |
2 |
SCIE |
Cambridge University Press |
2023
|
S.No |
Authors |
Title of the paper |
Name of the Journal |
Vol. No |
Issue No |
Page Nos |
Month & Year |
Impact factor |
SCI/SCIE/Scopus |
Publisher |
|
1 |
M. JothiHariPrasad, I. Sudhakar, S.Adinarayana, D V N J JaggannadhaRao |
Simulation and validation of experimental residual stresses of dissimilar AA2124 and AA7075 TIG weld joint using ANSYS APDL |
International Journal on Interactive Design and Manufacturing. |
|
|
|
2023 |
2.1 |
ESCI |
Springer |
|
2 |
I.Sudhakar,, S.Adinarayana,, S.Vikash, V.S.N. Venkata Ramana |
Microstructure and Mechanical behavior of similar and dissimilar AA2114 and AA7075 aluminium alloy joints using fusion welds. |
Materials Today: Proceedings |
|
|
|
2023 |
|
Scopus |
Elsevier |
|
3 |
I.Sudhakar, Veeraiah G,,S.AtchyutRao,S.V.A.R. Sastry. Optimization of Drilling Parameters on Hemp- Pineapple Hybrid Natural Fiber Composites Journal of Polymer & Composites. |
Optimization of Drilling Parameters on Hemp- Pineapple Hybrid Natural Fiber Composites |
Journal of Polymer and Composites |
|
|
|
2023 |
|
Web of Science |
STM |
|
4 |
M. JothiHariPrasad, I. Sudhakar, S.Adinarayana, D V N J JaggannadhaRao |
Simulation and validation of experimental residual stresses of dissimilar AA2124 and AA7075 TIG weld joint using ANSYS APDL
|
International Journal on Interactive Design and Manufacturing. |
|
|
|
2023 |
2.1 |
ESCI |
Springer |
|
5 |
Veeraiah Goriparthi, RamanaiahNallu, RohinikumarChebolu, SudhakarIndupuri and Ramesh Rudrapati |
Experimental studies on mechanical behavior of TIG and Friction Stir Welded AA5083 - AA7075 dissimilar aluminum alloys |
Advances in Materials Science and Engineering |
|
|
|
2023 |
|
ESCI |
Hindawi Publishing Corporation. |
|
6 |
G Veeraiah, N Ramanaiah, I Sudhakar, BVSRN Santhosi |
Mechanical and Electromagnetic shielding properties of TIG welded dissimilar aluminum alloys |
IJETT |
|
|
|
2023 |
|
Scopus |
Sandip Foundation |
|
7 |
G Veeraiah, N Ramanaiah, I Sudhakar, B Srinivas |
Influence of joining technique on electromagnetic properties and corrosion behaviour of dissimilar weld joints |
European Chemical Bulletin |
|
|
|
2023 |
|
Scopus |
Deuton-X Ltd. |
|
8 |
G. Aakarsh, B. Sai Vamsi, S. Kavya, S Vinay Varma, I Sudhakar |
.Influence of different cooling media on morphology, mechanical and corrosion of AISI 1040 grade steel |
Materials Today: Proceedings |
|
|
|
2023 |
|
Scopus |
Elsevier |
|
9 |
I.Sudhakar,, S.Adinarayana,, S.Vikash, V.S.N. Venkata Ramana |
Microstructure and Mechanical behavior of similar and dissimilar AA2114 and AA7075 aluminium alloy joints using fusion welds. |
|
|
|
|
2023 |
|
Scopus |
Elsevier |
|
10 |
D Nagaraju, S S Mendu, N D Chinta |
A numerical approach to design building envelope for energy efficient building |
International Journal on Interactive Design and Manufacturing (IJIDeM) |
|
|
1-20 |
2023 |
2.1 |
ESCI |
Springer |
|
11 |
P R Naveen, S K Pisipaty, S S Mendu |
Experimental investigation of effect of extent and position of bypass openings on performance of a single unit liquid desiccant based indirect evaporative cooler |
Teknomekanik |
6 |
2 |
67-79 |
2023 |
|
- |
Universitas Negeri Padang |
|
12 |
Mendu, S.S., Emadabathuni, A.K., Sannapareddy,A.,Kaki, S.B |
Experimental investigations to measure thermodynamic properties of MWCNT/MnCl2 composite material for thermochemical energy storage system |
International Journal on Interactive Design and Manufacturing (IJIDeM) |
|
|
|
2023 |
2.1 |
ESCI |
Springer |
|
13 |
P R Naveen, S K Pisipaty, S S Mendu |
Numerical Investigation of of extent and position of bypass openings on performance of a single unit liquid desiccant based indirect evaporative cooler |
Journal of Mechanical Engineering |
|
|
|
2023 |
|
Scopus |
College of Engineering, Universiti Teknologi MARA |
|
14 |
VeeraiahChebrolu, RamjiKoona& R S Umamaheswara Raju |
Automated Evaluation of Surface Roughness using Machine Vision based Intelligent Systems |
Journal of Scientific & Industrial Research (JSIR) |
82 |
1 |
11-15 |
2023 |
|
- |
NISCAIR |
|
15 |
Varun Chebrolu, RamjiKoona& R S Umamaheswara Raju |
Machine vision based surface roughness assessment system based on the Internet of Things and contourlet transforms |
International Journal on Interactive Design and Manufacturing (IJIDeM |
|
|
|
2023 |
2.1 |
ESCI |
Springer |
|
16 |
VeeraiahChebrolu, RamjiKoona& R S Umamaheswara Raju |
Automated Evaluation of Surface Roughness using Machine Vision based Intelligent Systems |
Journal of Scientific & Industrial Research (JSIR) |
82 |
1 |
11-15 |
2023 |
|
- |
NISCAIR |
|
17 |
Varun Chebrolu, RamjiKoona& R S Umamaheswara Raju |
Machine vision based surface roughness assessment system based on the Internet of Things and contourlet transforms |
International Journal on Interactive Design and Manufacturing (IJIDeM |
|
|
|
2023 |
2.1 |
ESCI |
Springer |
|
18 |
Veeraiah G, Ramanaiah N, Rohini Kumar Ch, Sudhakar I, Ramesh Rudrapati |
Experimental studies on mechanical behavior of TIG and Friction Stir Welded AA5083 - AA7075 dissimilar aluminum alloys |
Materials Science and Engineering |
|
|
|
2023 |
|
Scopus |
Elsevier |
|
19 |
G Veeraiah, N Ramanaiah, I Sudhakar, BVSRN Santhosi |
Mechanical and Electromagnetic shielding properties of TIG welded dissimilar aluminum alloys |
IJETT |
|
|
|
2023 |
|
Scopus |
Sandip Foundation |
|
20 |
G Veeraiah, N Ramanaiah, I Sudhakar, B Srinivas |
Influence of joining technique on electromagnetic properties and corrosion behaviour of dissimilar weld joints |
European Chemical Bulletin |
|
|
|
2023 |
|
Scopus |
Deuton-X Ltd. |
|
21 |
G Pramod kumar |
Investigation of microstructure, mechanical and corrosion properties of Inconel 617 joints welded by Laser-MIG hybrid welding |
Journal of Materials: Design and Applications |
|
|
|
2023 |
2.5 |
SCI |
Sage |
|
22 |
G Pramod kumar |
Experimental investigation on high-temperature tensile behavior of cold metal transfer pulse multi-control welding of Inconel 617 alloy |
Results in Surfaces and Interfaces |
|
|
|
2023 |
|
Scopus |
Elsevier |
|
23 |
G Pramod kumar |
Characterization of corrosion behavior of Inconel 617 welded joints using CMT-GMAW multi control welding |
Surface Review and Letters |
|
|
|
2023 |
1.2 |
SCI |
World Scientific |
|
24 |
MuralikrishnaBoni, VenkateswarluVelisala ,SivaprasadKattela,S. Venkata Sai Sudheer,4 Gandhi Pullagura ,DebabrataBarik |
Comparison of the Anode Side Catalyst Supports with and without Incorporation of Liquid Electrolyte Layer on the Performance of a Passive Direct Methanol Fuel Cell |
International journal of energy research |
|
|
|
2023 |
4.3 |
SCIE |
Wiley |
|
25 |
Naveen Kumar Ch , |
Suitability of kusum biodiesel blends as an alternate fuel for a single cylinder diesel engine |
Materials Today: Proceedings |
|
|
|
2023 |
|
Scopus |
Elsevier |
|
26 |
MuralikrishnaBoni, VenkateswarluVelisala |
: Enhancement of Air breathing-Direct methanol fuel cell performance by optimizing anode flow channel widths and cathode current collector open ratios |
Journal of energy engineering |
|
|
|
2023 |
1.962 |
SCIE |
ASCE |
|
27 |
Balasubramanian KaruppudayarRamaraj, Ravi Kumar Kottala |
Preparation and characterisation of binary eutectic phase change material/activated porous bio char/multi walled carbon nano tubes as composite phase change material |
Fullerenes, Nanotubes and Carbon Nanostructures |
31 |
1 |
75-89 |
2023 |
2.1 |
SCIE |
Taylor & Francis |
|
28. |
BS Jinshah, KR Balasubramanian, Kottala Ravikumar, S Divakar |
A dual-mode novel parabolic trough collector for process heating applications in small scale industries—thermo-hydraulic and performance investigation |
Applied Thermal Engineering |
218 |
0 |
119287 |
2023 |
6.1 |
SCI |
Elsevier |
|
29. |
R John Peter, KR Balasubramanian, K Ravi Kumar |
Comparative study on the thermal performance of microencapsulated phase change material slurry in tortuous geometry microchannel heat sink |
Applied Thermal Engineering |
218 |
0 |
119328 |
2023 |
6.1 |
SCI |
Elsevier |
|
30. |
SirishaBhadrakaliAinapurapu, Venkata AnanthaRamasastryDevulapalli, Ram PrabhuTheagarajan, Bharat Kumar Chigilipalli, Ravi Kumar Kottala, MuralimohanCheepu |
Microstructure and mechanical properties of the bimetallic wire arc additively manufactured structure (BAMS) of SS304L and SS308L fabricated by hybrid manufacturing process |
Transactions of the Indian Institute of Metals |
76 |
2 |
419-426 |
2023 |
1.5 |
SCIE |
Springer |
|
31. |
Ravi Kumar Kottala, Bharat Kumar Chigilipalli, SrinivasnaikMukuloth, RagavananthamShanmugam, Venkata CharanKantumuchu, SirishaBhadrakaliAinapurapu, MuralimohanCheepu |
Thermal degradation studies and machine learning modelling of nano-enhanced sugar alcohol-based phase change materials for medium temperature applications |
Energies |
16 |
5 |
2187 |
2023 |
3 |
SCI |
MDPI |
|
32. |
Bharat Kumar Chigilipalli, Teja Karri, Sathish Naidu Chetti, Girish Bhiogade, Ravi Kumar Kottala, MuralimohanCheepu |
A review on recent trends and applications of IoT in additive manufacturing |
Applied System Innovation |
6 |
2 |
50 |
2023 |
3.8 |
ESCI |
MDPI |
|
33. |
Ravi Kumar Kottala, KR Balasubramanian, BS Jinshah, S Divakar, Bharat Kumar Chigilipalli |
Experimental investigation and machine learning modelling of phase change material-based receiver tube for natural circulated solar parabolic trough system under various weather conditions |
Journal of Thermal Analysis and Calorimetry |
148 |
14 |
7101-7124 |
2023 |
3.2 |
SCIE |
Springer |
|
34. |
K Ravikumar, GV Nagesh, R Venkateswara Rao, Amruthaluru Saikiran, R Swapna, TuluguGunavardhana Naidu, SampatiraoHariprasad |
Synthesis and Characterization of Shape-Stable Bio-Char Composite PCM Material for Solar Desalination Application |
Materials Science Forum |
1099 |
0 |
27-36 |
2023 |
2.1 |
Scopus |
Trans Tech Publications |
2022
|
S.No |
Authors |
Title of the paper |
Name of the Journal |
Vol. No |
Issue No. |
Page No. |
Month& Year |
Impact factor |
SCI/SCIE/Scopus |
Publisher |
|
1 |
Fathimunnisa Begum , N. Ravi Kumar, V. Ramachandra Raju |
Tribological Experimentation with JatropaBiofluid and Nano particles as lubricant additives |
Transactions of Famena |
46 |
3 |
41-50 |
Jan 2022 |
1.1 |
Scopus |
Famena |
|
2 |
Veeraiah G .RamanaiahN, Sudhakar.I, Venkateswarlu K. |
Influence of AC-TIG weld current on dissimilar AA5083 and AA 7075 aluminium alloy. |
Advances in material processes and technologies |
|
|
|
Feb 2022 |
2.0 |
ESCI |
Taylor & Francis Ltd. |
|
3 |
. I. Sudhakar, S.V.A.R. Sastry, V.S.N. Venkata Ramana |
Synthesis and formability of Al/(Fe-Mn) particulate composite using stir casting. |
Journal of Polymer and Composites |
10 |
1 |
80-88 |
April 2022 |
|
Web of Science |
STM |
|
4 |
S S Mendu and D Nagaraju |
Minimization of entropy generation in natural convection using optimum isothermal heaters: CFD analysis |
International Journal of Environmental Science and Technology |
19 |
|
1-14 |
May 2022 |
3.0 |
SCIE |
Springer Science & Business Media |
|
5 |
BVSRN Santhosi, K Ramji, NBR Mohan Rao, Dora Nagaraju, MK Naidu |
Microwave absorption analysis of graphene-based hybrid nanocomposites: experimental, numerical and component level testing studies |
Plastics, Rubber and Composites, Macromolecular Engineering |
|
|
1-16 |
Jan2022 |
|
SCI |
Taylor & Francis Ltd. |
|
6 |
G Pramod kumar |
Experimental investigation of Nano-encapsulated molten salt for medium-temperature thermal storage systems and modeling of neural network |
International Journal of Thermophysics |
43 |
|
145 |
2022 |
2.5 |
SCI |
|
|
7 |
B Srinivas, YR Kanth, JB Rao |
Effect of Heat Transfer Rate on Different Shapes using Different Moulding Sands on Microstructural and Mechanical Properties of AA2024 by CO2 Process |
Design Engineering |
|
1 |
665-680 |
2022 |
|
- |
|
|
8 |
BS Jinshah, KR Balasubramanian, Ravi Kumar Kottala, S Divakar |
Influence of power step on the behavior of an open natural circulation loop as applied to a parabolic trough collector |
Renewable Energy |
181 |
0 |
1046-1061 |
2022/1 |
9 |
SCI |
Elsevier |
|
9 |
Kottala Ravi Kumar, KR Balasubramanian, BS Jinshah, Nalluri Abhishek |
Experimental analysis and neural network model of MWCNTs enhanced phase change materials |
International Journal of Thermophysics |
43 |
0 |
1-31 |
2022/1 |
2.5 |
SCIE |
Springer |
|
10 |
Ravi Kumar Kottala, Balasubramanian KaruppudayarRamaraj, Jinshah BS, Muthya Goud Vempally, MaheswariLakshmanan |
Experimental investigation and neural network modeling of binary eutectic/ expanded graphite composites for medium temperature thermal energy storage |
Energy Sources, Part A: Recovery, Utilization, and Environmental Effects |
0 |
0 |
1-24 |
2022 |
2.3 |
SCIE |
Taylor & Francis |
|
11 |
KR Balasubramanian, BS Jinshah, Kottala Ravikumar, S Divakar |
Thermal and hydraulic characteristics of a parabolic trough collector based on an open natural circulation loop: The effect of fluctuations in solar irradiance |
Sustainable Energy Technologies and Assessments |
52 |
0 |
102290 |
2022 |
7.1 |
SCI |
Elsevier |
|
12 |
KaruppudayarRamaraj Balasubramanian, Kottala Ravi Kumar, SakthivelPuvaneswaranSathiyaPrabhakaran, Basheer Sheeba Jinshah, Nalluri Abhishek |
Thermal degradation studies and hybrid neural network modelling of eutectic phase change material composites |
International Journal of Energy Research |
46 |
11 |
15733-15755 |
2022 |
4.3 |
SCI |
Wiley |
|
13 |
K Ravi Kumar, KR Balasubramanian, G Pramod Kumar, C Bharat Kumar, Murali Mohan Cheepu |
Experimental investigation of nano-encapsulated molten salt for medium-temperature thermal storage systems and modeling of neural networks |
International Journal of Thermophysics |
43 |
9 |
145 |
2022 |
2.5 |
SCIE |
Springer |
Details of Patents
|
S.No |
Date of filing |
Application Number |
Authors |
Title of Invention |
Publication date |
|
2024-25 |
|||||
|
12 |
30/05/24 |
6369322 |
Murali Mohan Cheepu, Siva Subrahmanyam Mendu, Padmaja Appikonda, Ragavanantham Shanmugam |
Thermal Energy Storage Testing Device |
11/06/24 |
|
13 |
10-07-2024 |
C01B 32/318. |
Ammisetti Dhanunjay Kumar, Aryasomyajula Venkata Satya Lakshmi Sai Bharadwaj, Chinnam Sampath, Doddamani Dadapeer, Gaddala Baburao, Konanki Sreenath, Kottala Ravi Kumar, Kumma Nagarjuna, Namdeti Rakesh, Veeraiah Goriparthi |
System for Synthesizing an Activated Hydro Char-Based Phase Change Composite |
04-11-24 |
|
2023-24 |
|||||
|
8 |
18/01/24 |
6333774 |
Murali Mohan Cheepu, Padmaja Appikonda, Siva Subrahmanyam Mendu |
AI based Additive Manufacturing Device |
04-01-2024 |
|
9 |
11-12-23 |
401881-001 |
Siva Subrahmanyam Mendu,Padmaja Appikonda,Murali Mohan Cheepu |
Digital Welding Aparatus |
16/02/2024 |
|
10 |
18/12/23 |
402409-001 |
Siva Subrahmanyam Mendu,Padmaja Appikonda,Murali Mohan Cheepu |
DIGITAL WELDING APPARATUS |
05-03-24 |
|
11 |
10-07-2024 |
C01B 32/318. |
Ammisetti, Dhanunjay Kumar, Aryasomyajula Venkata Satya Lakshmi Sai Bharadwaj,Chinnam Sampath, Doddamani Dadapeer,Gaddala Baburao,Konanki Sreenath, Kottala Ravi Kumar, Kumma Nagarjuna, Namdeti Rakesh, Veeraiah Goriparthi |
System for Synthesizing an Activated Hydro Char-Based Phase Change Composite |
04-11-24 |
|
2022-23 |
|||||
|
4 |
15/10/2022 |
2.02241E+11 |
Varun Chebrolu |
Biomedical interventions for analysis of gene mutations of cancer patients for early prediction and diagnosis of the disease |
28/10/2022 |
|
5 |
01-12-22 |
2.02241E+11 |
Abhisek nalluri, G Pramodkumar, Bharat kumar ch, Ravi kumar K, Nagarjuna kumma,Bukke Devaraj Naik,Lella kranthi kumar |
Conductive coating for |
09-12-22 |
|
6 |
01-12-22 |
202241069327 A |
K Ch Sekhar, Surakasi Raviteja, M. Yerni Prasada Rao, K. Pavan Kumar, Mrs. Manepalli.Sailaja |
Design and Manufacture of |
09-12-22 |
|
7 |
01-12-22 |
202241069379 A |
K Ch Sekhar, Surakasi Raviteja,M. Yerni Prasada Rao,N.Japhia Sudarsan,Krishna Prafulla Badi, Bala Divya Potnuru |
Impact and recent application of green concept in |
09-12-22 |
|
2021-22 |
|||||
|
2 |
10-02-2022 |
202241007236 A |
P. Satish Rama Chowdary,R.S.Umamaheswara Raju,VVSSS.Chakravarthy |
Smart System for Adaptive Surface Roughness Control of Work piece and Method Thereof |
18/02/2022 |
|
3 |
09-06-2022 |
202211032959A |
Mishra, R S Umamaheswara Raju, M Anil Prakash, B A Ranaganath, B Srinivas |
3D Printing of Bio Compatible Ceramics as Scaffolds |
24/06/2022 |
|
2020-21 |
|||||
|
1 |
22/04/2021 |
2.02141E+11 |
Avinash Gandi, Praveen Kalla,Koona Ramji, P Ravindranath |
A Modular Underwater Vehicle System for Maintenance, Surveillance and Reconnaissance Operations |
28/10/2022 |
|
S.No |
Research supervisor |
Name of the Research Scholar |
University |
Year of Admission |
Area of work |
Status |
|
1 |
Dr.B.Murali Krishna,
|
B.Venkata Rao
|
JNTU GV |
2025 |
Fuel cells |
On going |
|
2 |
Dr. N. Ravi Kumar |
D. Chaithnya,
|
JNTU GV |
2025 |
Nano lubricants |
On going |
|
3 |
Sri A Venkata Swami, JNTU ,Kakinada |
JNTUK |
2015 |
Alternate Fuels |
On going |
|
|
4 |
Ms.Fathimunisa Begum, JNTU ,Kakinada |
JNTUK |
2015 |
Nano Lubricants |
On going |
|
|
5 |
Dr. S. Srinivasa Rao |
B.Ushawani
|
JNTU GV |
2025 |
Design and Manufacturing |
On going |
|
6 |
Sri S T V S S Varma Siruvuri, JNTU,Kakinada |
JNTUK |
2015 |
Design and Manufacturing |
On going |
|
|
7 |
Smt. Uma Lalitha I |
JNTUK |
2019 |
Production |
On going |
|
|
8 |
Dr. M. S. Subrahmanyam |
Ch. Dilleswara Rao |
JNTUK |
2019 |
Energy Storage |
On going |
|
9 |
Dr.M.Siva Subrahmanyam |
D. Naga Raju |
JNTUGV |
2023 |
Energy Efficient Buildings & CFD |
On going |
- Funded Research in diversified areas like CNC machine tools, Alternative fuels, vibrations etc worth 62 Lakhs sanctioned by DST/UGC/AICTE.
- Prof. K. V. L. Raju has been awarded GOLD MEDAL for Best Research in the year 2008
- Dr S. Srinivasa Rao has got GOLD MEDAL for his research publication in the year 2012 by IE India
- B Madhava Varma, achieved top in NPTEL course on Strength of Materials with 99% score.
- Best paper award for Mr.B.Srinivas in International Conference, organized by MLR inst. of technology & mgmt, Hyderabad.
- Sri. I. Sudhakar has been awarded with best research paper in National Weld Meet in the year 2014 organized by Indian Institute of Welding Chennai Chapter
- Sri. I. Sudhakar has been awarded with “ Panthaki Memorial Award ” in National Weld seminar in the year 2016 organized by Indian Institute of Welding
- N.Jagadeesh,Asst Professor got selected for international Conference held on 12th march'17 on"Hot Workability & Corrosion behavior of EN-31 grade steel"
- B Srinivas,Asst Professor awarded with silver medal in international Conference held at SVERICE,Pandharpur on 20 &21st dec 2016.
- R&D Project on Viability of stand-alone hybrid renewable energy water Pumping System for agricultural applications in Vizianagaram funded by MVGR Research Board, under the Principal Investigators:
- Dr. M. Siva Subarhmanyam (Mech)
- Co-PI: Prof. N. Ravi Kumar(Mech)
- Prof. Sarat Kumar Sahu (EEE)
Students:
- Mr. Ch. Sandeep, Shuttle Winner in JNTU K Inter Collegiate Tournament of Central Zone-A -2018
- R. Kiran Kumar, T.Gopi, K.Sai Pavan Kumar & K.Vinay babu, Runners in Basket Ball JNTU K Inter Collegiate Tournament of Central Zone-A -2018
- *University gold medallists : Nandilla Lavanya (2011-2015), G Haritha (2009-2013), G Ramakrishna (1997-2001), University Silver Medalists : Rupal Singvi, K Deepak (2002).
- Tier III (national level) of SAE (Society of Automobile Engineering) student convention 2015 – First Place in CNC Milling and Second Place in Sheet Metal.
- Tier II (State level) of SAE (Society of Automobile Engineering) student convention 2015 – First Place in Modeling , animation, CNC Milling and Second Place in Business plan, CNC Turning and Mechanical Engg Design CAD.
- Team VIKRANTA, got selected in the Virtuals and stood 5th position in 3 Seated Electric ATV (All Terrain vehicle) 2015 at Chitkara University, Chandigarh.
- Team INVINCIBLE, got selected in the Virtuals of ATV (All Terrain vehicle) 2015 at Chitkara University, Chandigarh.
- The only Engineering Institution in Andhra Pradesh qualified from the design event ‘VIRTUAL BAJA 2014’ and manufactured ALL TERRAIN Vehicle for FINAL SAE BAJA 2014 and successfully participated in in the final event held at indore.
- Stood First at national level in the design event ‘VIRTUAL ESVC 2015’ organized by ISTE
- Stood Ninth at national level in the endurance event of ‘FINAL ESVC 2015’ organized by ISTE
- The only Engineering Institution in Andhra Pradesh qualified from the design event ‘VIRTUAL SUPRA 2015’ at national level organized by SAE INDIA.
- Best Design award in Vishnu E-Moto Championship 2016 at VEC
Placements 2021-25
|
Regd No |
Student Name |
Selected in |
CTC |
|
|
1 |
21331A0356 |
G Prasanna Kumar |
ACE Designers |
3.42 Lakhs |
|
2 |
21331A0325 |
Bhyaravbatla Sunil |
ACE Designers |
3.42 Lakhs |
|
3 |
21331A0360 |
Gunna Chandra Mouli |
VEM Technologies |
2.6 Lakhs |
|
4 |
21331A03A4 |
P Phani Vardhan |
VEM Technologies |
2.6 Lakhs |
|
5 |
21331A03E4 |
T Jagadeesh |
VEM Technologies |
2.6 Lakhs |
|
6 |
21331A03E0 |
T Chakradhar Rao |
VEM Technologies |
2.6 Lakhs |
|
7 |
22335A0355 |
T Karthik |
VEM Technologies |
2.6 Lakhs |
|
8 |
21331A03C1 |
P Dhanush |
VEM Technologies |
2.6 Lakhs |
|
9 |
22335A0358 |
Y Karthik |
VEM Technologies |
2.6 Lakhs |
|
10 |
22335A0323 |
Y KARTHIK |
VEM Technologies |
4 Lakhs |
|
11 |
21331A0305 |
AJJADA YUGENDHRA KARTHIK |
Stellantis |
4.5 Lakhs |
|
12 |
21331A0308 |
Alamanda Kishore Kumar |
Stellantis |
4.5 Lakhs |
|
13 |
21331A0310 |
AMITI SAI KUSULU |
Stellantis |
4.5 Lakhs |
|
14 |
21331A0329 |
Bongu Tirumala Rao |
Stellantis |
4.5 Lakhs |
|
15 |
21331A0336 |
CHINTAKAYALA PRUDHVI ADARSH |
Stellantis |
4.5 Lakhs |
|
16 |
21331A0341 |
DASI PRANAY |
Stellantis |
4.5 Lakhs |
|
17 |
21331A0348 |
Earle Gowtham kumar |
Stellantis |
4.5 Lakhs |
|
18 |
21331A0352 |
Galla Balakrishna |
Stellantis |
4.5 Lakhs |
|
19 |
21331A0357 |
GORLE Pradeep kumar |
Stellantis |
4.5 Lakhs |
|
20 |
21331A0358 |
Gorli Santhosh |
Stellantis |
4.5 Lakhs |
|
21 |
21331A0367 |
Kandula china sandeep |
Stellantis |
4.5 Lakhs |
|
22 |
21331A0374 |
Kondru.Gnanendra |
Stellantis |
4.5 Lakhs |
|
23 |
21331A0377 |
KORUPOLU HEMANTH KUMAR |
Stellantis |
4.5 Lakhs |
|
24 |
21331A0388 |
Madapu Manikanta |
Stellantis |
4.5 Lakhs |
|
25 |
21331A0393 |
MARPU CHAKRI |
Stellantis |
4.5 Lakhs |
|
26 |
21331A0394 |
M.Harsha vardhan |
Stellantis |
4.5 Lakhs |
|
27 |
21331A0395 |
MUNDURU RAKESH |
Stellantis |
4.5 Lakhs |
|
28 |
21331A03C2 |
P. Venkata bhargav |
Stellantis |
4.5 Lakhs |
|
29 |
21331A03D2 |
S.V RAVITEJA |
Stellantis |
4.5 Lakhs |
|
30 |
22335A0307 |
Gantla Sai Chandra Sekhar |
Stellantis |
4.5 Lakhs |
|
31 |
22335A0327 |
BOTCHA ANURAGA KUMAR |
Stellantis |
4.5 Lakhs |
|
32 |
22335A0331 |
Manohar Dwarapudi |
Stellantis |
4.5 Lakhs |
|
33 |
22335A0334 |
GALLA SRI CHARAN |
Stellantis |
4.5 Lakhs |
|
34 |
22335A0336 |
G.V.S.Chaitanya |
Stellantis |
4.5 Lakhs |
|
35 |
22335A0339 |
Juttu Prasanth |
Stellantis |
4.5 Lakhs |
|
36 |
22335A0341 |
KANURI YUTESH |
Stellantis |
4.5 Lakhs |
|
37 |
22335A0343 |
Killada Satish Kumar |
Stellantis |
4.5 Lakhs |
|
38 |
22335A0344 |
Hemanth Maddila |
Stellantis |
4.5 Lakhs |
|
39 |
22335A0345 |
M. Hemanth kumar |
Stellantis |
4.5 Lakhs |
|
40 |
22335A0350 |
PULLE VENKATA SIVAKRISHNA |
Stellantis |
4.5 Lakhs |
|
41 |
21331A0312 |
APPIKONDA SAI GOWTHAM |
Amphenol |
3.9 Lakhs |
|
42 |
21331A0313 |
Ari SasiKumar |
Amphenol |
3.9 Lakhs |
|
43 |
21331A0314 |
Avala Bhaskar Sai Charan |
Amphenol |
3.9 Lakhs |
|
44 |
21331A0315 |
AVANTCHA VENKATA LALIT KUMAR |
Amphenol |
3.9 Lakhs |
|
45 |
21331A0332 |
CHAMANTHULA AKHILA |
Amphenol |
3.9 Lakhs |
|
46 |
21331A0370 |
Katta Bhargav |
Amphenol |
3.9 Lakhs |
|
47 |
21331A0372 |
K Poorna Chandra Rao |
Amphenol |
3.9 Lakhs |
|
48 |
21331A03B2 |
PEYYALA VAMSI KRISHNA |
Amphenol |
3.9 Lakhs |
|
49 |
21331A03B3 |
PINNINTI MALATHI |
Amphenol |
3.9 Lakhs |
|
50 |
21331A03D3 |
S.V.RAGHAVENDRA SAI KUMAR |
Amphenol |
3.9 Lakhs |
|
51 |
22335A0301 |
Allu Supriya |
Amphenol |
3.9 Lakhs |
|
52 |
22335A0302 |
AVASARALA NAGA SATYA PAVAN KUMAR |
Amphenol |
3.9 Lakhs |
|
53 |
22335A0311 |
Rahul Koppisetti |
Amphenol |
3.9 Lakhs |
|
54 |
22335A0312 |
MAMIDI NARENDRA |
Amphenol |
3.9 Lakhs |
|
55 |
21331A03A3 |
Paidi Vamsi krishna |
RDC Concrete |
4 Lakhs |
|
56 |
21331A0327 |
Bommana Lahari |
RDC Concrete |
4 Lakhs |
|
57 |
21331A03F2 |
V. Yeswanth |
RDC Concrete |
4 Lakhs |
|
58 |
21331A03A8 |
Pasi Ketansai |
RDC Concrete |
4 Lakhs |
|
59 |
22335A0323 |
Yarabati Karthik |
Delphi TVS |
3 Lakhs |
|
60 |
21331A0387 |
Madapana Giribabu |
Delphi TVS |
3 Lakhs |
|
61 |
21331A0365 |
Kambapu Bhuvanesh Reddy |
Delphi TVS |
3 Lakhs |
|
62 |
22335A0330 |
Dasari Omkar |
Delphi TVS |
3 Lakhs |
|
63 |
22335A0337 |
Indala Likith |
Delphi TVS |
3 Lakhs |
|
64 |
22335A0325 |
Amara Krihna Kamal |
Delphi TVS |
3 Lakhs |
|
65 |
22335A0322 |
Vukapalli Anil Kumar |
Delphi TVS |
3 Lakhs |
|
66 |
22335A0329 |
Dandu Rajesh Kumar Varma |
Delphi TVS |
3 Lakhs |
|
67 |
22335A0333 |
Gajjala Venkata Ramana |
Delphi TVS |
3 Lakhs |
|
68 |
22335A0324 |
Addala Sai Chaitanya |
Delphi TVS |
3 Lakhs |
|
69 |
21331A0370 |
Katta Bhargav |
Delphi TVS |
3 Lakhs |
|
70 |
21331A0372 |
Ketireddy Poorna Chandra Rao |
Delphi TVS |
3 Lakhs |
|
71 |
22335A0335 |
Gedda Varsha Sankar Vinayak |
Delphi TVS |
3 Lakhs |
|
72 |
21331A0315 |
AVANTCHA VENAKATA LALIT KUMAR |
DY Auto |
3.83 Lakhs |
|
73 |
21331A0323 |
BHOGAPURAM KARTHIK |
DY Auto |
3.83 Lakhs |
|
74 |
21331A0333 |
Narendra |
DY Auto |
3.83 Lakhs |
|
75 |
21331A0338 |
D.Uday Sriram |
DY Auto |
3.83 Lakhs |
|
76 |
21331A0343 |
Davala Dinesh kumar |
DY Auto |
3.83 Lakhs |
|
77 |
21331A0359 |
GORREPATI HARI NAGA PAVAN SAIRAM |
DY Auto |
3.83 Lakhs |
|
78 |
21331A0376 |
KORNI KISHORE |
DY Auto |
3.83 Lakhs |
|
79 |
21331A0378 |
Korupolu kishore |
DY Auto |
3.83 Lakhs |
|
80 |
21331A0382 |
KOYYA SURYA KIRAN REDDY |
DY Auto |
3.83 Lakhs |
|
81 |
21331A0384 |
LINGAM RAKESH |
DY Auto |
3.83 Lakhs |
|
82 |
21331A0386 |
MACHERLA SUSWANTH KUMAR |
DY Auto |
3.83 Lakhs |
|
83 |
21331A0362 |
Hanumanthu Mohana Rao |
DY Auto |
3.83 Lakhs |
|
84 |
21331A03B7 |
Potireddy Triveni |
MTAR Technologies |
2.04 Lakhs |
|
85 |
21331A03E6 |
U Naga Bhuvaneswari |
MTAR Technologies |
2.04 Lakhs |
|
86 |
21331A03A6 |
P Yuktha Sreeja |
MTAR Technologies |
2.04 Lakhs |
HoD Contact – 08922-241038
Email – [email protected]
Department No. With Extn. - 08922-241732, 241039, Extn. - 302